Sunsampo produces heating energy, removes harmful moisture and stores heat very profitably.
Sunsampo is an efficient circulating hot air solar thermal solution where solar collectors generate value for money. Sunsampo extends the life cycle and health of the building, as Sunsamo also has a special ability to remove excess harmful moisture. Why invest in a reservoir when you can use house structures as thermal storage?
What does Sunsampo do and how does it work?
Watch video demos.
|
|
|
Sunsampo 212 hot air roof collector
The Sunsampo 212 ceiling collector is the most cost-effective roof-mounted, air-circulating solar collector on the market. Its unique design allows for efficient air heating and removal of excess moisture. The Sunsampo 212 roof collector is manufactured to withstand the demanding conditions in Finland, snow and wind loads and frost. In addition to the roof, the collector can also be installed on the yard or on the wall.
In manufacturing, we have favored nearby, safe, durable and tested materials. The frame is made of domestic spruce and wood fiber, which are safe for breathing and very heat-insulating. In addition, coated steel that is very resistant to Finnish conditions is used in the frame.
2-8 Sunsampo 212 collector modules can be conveniently connected together. By increasing the surface area, the power of the collector can be increased to suit each house. Sunsampo 212 collectors can be mounted on a prefabricated mounting bracket according to the roof material (brick pattern, profile sheet, machine seam, brick). The mounting rails of the collector allow it to be screwed to a wooden frame or wall, for example.
Sunsampo 212 is a maintenance-free solar collector. The forces of nature, such as wind, rain, and snow, keep it clean.
TECHNICAL INFORMATION:
- dimensions (LxWxH) 120cm x 200cm x 15cm
- area 2.4 m²
- peak power of 1000 watts
- material: wood, wood fiber, steel and polycarbonate
- possibility of connection 2-8 modules side by side 4.8 m²- 19.2 m²
For installations of more than eight modules, a manifold ductwork is used.
The product is made in Finland.
In manufacturing, we have favored nearby, safe, durable and tested materials. The frame is made of domestic spruce and wood fiber, which are safe for breathing and very heat-insulating. In addition, coated steel that is very resistant to Finnish conditions is used in the frame.
2-8 Sunsampo 212 collector modules can be conveniently connected together. By increasing the surface area, the power of the collector can be increased to suit each house. Sunsampo 212 collectors can be mounted on a prefabricated mounting bracket according to the roof material (brick pattern, profile sheet, machine seam, brick). The mounting rails of the collector allow it to be screwed to a wooden frame or wall, for example.
Sunsampo 212 is a maintenance-free solar collector. The forces of nature, such as wind, rain, and snow, keep it clean.
TECHNICAL INFORMATION:
- dimensions (LxWxH) 120cm x 200cm x 15cm
- area 2.4 m²
- peak power of 1000 watts
- material: wood, wood fiber, steel and polycarbonate
- possibility of connection 2-8 modules side by side 4.8 m²- 19.2 m²
For installations of more than eight modules, a manifold ductwork is used.
The product is made in Finland.
What does the Sunsampo system contain?
The Sunsampo system includes solar collectors with accessories, an intelligent Sunsampo controller and air transport duct equipment. Other things are already in place on the property, such as structures for thermal storage and space for collectors - either on the roof, on the wall or in the yard.
The sensors in the Sunsampo controller detect that the temperature in the collector rises higher than the temperature in the downstairs rooms of the house. The suction of air from the ground floor to the collector is started. If there is excessive moisture in the air downstairs, it is removed to the outside air through the breathable structure of the collector during heating. The heated and humidity controlled air is then returned downstairs. The walls, structures and soil downstairs absorb the heat. Enhancing storing of the heat to the structures surface-mounted enclosures can be used. This also helps to avoid an excessive rise in room temperature. The stored heat is released by itself at night and during rainy days, when heating is most needed.
|
|
Is heat stored for a long time?
When this air circulation is continued for several months, the excess moisture in the walls, structures and soil of the house is removed. As a result, their thermal conductivity values also change. For example, dry brick is closer to insulation in terms of thermal conductivity than wet equivalent materials. This drying of the structures reduces heat loss per se, but it also allows long-term storage of heat in the structures. Radiant energy from the summer is stored in the structures, and this heats the house even in the winter. The physical idea is to use a big mass from 50 tons to over 300 tons for thermal storage. The temperature of the mass will rise moderately by 5 to 10 degrees from normal temperature, but the amount of energy stored is huge. Low delta t compared to ambient temperature helps the storing of the thermal energy for a long time.
How much does Sunsampo produce?
Sunsampo produces heating energy. The yield of collectors is affected by many factors, such as the number of collectors, position, orientation, shading, and location.
For an example house, the calculation values are as follows:
For an example house, the calculation values are as follows:
- The location is Kiel in North Germany (Location affects available radiation and heating demand)
- There are five Sunsampo 212 collectors in the house
- The installation is made parallel to the south side of the roof (30 degrees from the horizontal)
- The annual energy consumption of the heating is 10,000 kwh
- The mass for energy storage is 100 tons.
Pic 1. Direct heating yield is 3270 kWh and 5060 kWh is stored to thermal storage.
Pic 1. Direct heating yield is 3270 kWh and 5060 kWh is stored to thermal storage.
How much does Sunsampo cost?
The equipment according to the example calculation includes four Sunsampo 212 collectors, machine seam ceiling brackets , two machine seam roof bushings, a fan, a muffler, two motor dampers, a Sunsampo controller and duct insulation.
Equipment price: 6879,00 € incl. VAT 24%
Estimated price for the installation work: 3,000,00 € incl. VAT 24%
Equipment price: 6879,00 € incl. VAT 24%
Estimated price for the installation work: 3,000,00 € incl. VAT 24%
Experiences from customers
"Sunsampo has worked as promised. It has also surprised us in producing heat while the radiation is still coming backwards. As soon as the radiation is available, Sunsampo will start up. It has been operating later in the fall and earlier in the spring than we expected. The humidity has also remained under control."
- Ira Laitakari-Svärd and Margo Svärd
- Ira Laitakari-Svärd and Margo Svärd
"The sun rustles in your wallet and makes you smile. Thank you Sunsampo! It makes you smile every time you go to see the control panel or walk into a sun-warmed house. Clean tech for the win!"
- Lauri Valli
- Lauri Valli
"Sunsampo has produced heat as I expected. The year after installation, it saved energy costs even until the end of December. It has removed moisture as promised. A customized model for our property is well suited for us.
I have been so pleased that another, larger, Sunsampo has already been installed in our large garage. "
- Markus Turunen, D.Sc.
I have been so pleased that another, larger, Sunsampo has already been installed in our large garage. "
- Markus Turunen, D.Sc.
What would I benefit from Sunsammo?
Let's find out right away. Each house is an individual. Leave your contact information and we will make a free calculation and offer. This does not bind you to anything. Our privacy statement describes the processing of your information and our principles when visiting at home.
Sunsampo brings benefits
Free heating energyHeating is responsible for most of the energy consumption of a residential property and always costs too much money. It is easy to replace purchasing energy with Sunsampo and solar energy.
|
Moisture managementMoisture allows the growth of mold, microbes and fungi. Moisture also increases the release of chemicals from building materials and destroys house structures. At the same time, the health of the residents is endangered. Sunsampo helps control excessive moisture.
|
Thermal storageWith the help of the air-circulating Sunsammo, thermal energy can be stored advantageously in the soil or in the property's own structures.
|
Releases:
1.4.2020 COVID-19 RELEASE
In connection with home visits related to provision and installation, our staff pays special attention to preventing the spread of infectious diseases. We go inside only to take care of the necessary things. Staff disinfect their hands and are equipped with appropriate respirators for home visits. In addition, we avoid distances of less than two meters in social interaction. Please let us know in advance if there are people in your home who are ill or people at risk of COVID.
6.5.2019 Sunsampo.com Oy is involved in the growth path of 2019 Kasvuopen Energy Innovations, where 15 companies were selected.
24.10.2018 The Lahti-based housing company carried out an energy renovation with Sunsampo and exhaust air heat pumps. Click here to read the story (in Finnish)
22.10.2018 On Facebook, we are on the new page https://www.facebook.com/sunsampo. Welcome to get to know!
In connection with home visits related to provision and installation, our staff pays special attention to preventing the spread of infectious diseases. We go inside only to take care of the necessary things. Staff disinfect their hands and are equipped with appropriate respirators for home visits. In addition, we avoid distances of less than two meters in social interaction. Please let us know in advance if there are people in your home who are ill or people at risk of COVID.
6.5.2019 Sunsampo.com Oy is involved in the growth path of 2019 Kasvuopen Energy Innovations, where 15 companies were selected.
24.10.2018 The Lahti-based housing company carried out an energy renovation with Sunsampo and exhaust air heat pumps. Click here to read the story (in Finnish)
22.10.2018 On Facebook, we are on the new page https://www.facebook.com/sunsampo. Welcome to get to know!
Sunsampo.com Ltd.
Sunsampo.com Oy is a Finnish innovative company specializing in solar heating. We are focused on the production and supply of efficient air-circulating solar collectors and heat distribution equipment. Our unique area of expertise is the distribution and storage of thermal energy at low cost, utilizing the masses of the property's structures and the air circulation of the solar collectors. Founded in 2014, the company's main product, Sunsampo, is based on decades of development work and long-term monitoring of completed projects. We get a superior solution with a payback period. Solar heating is everyone's sensible choice.
In cooperation with:
|
|
|
|
|